4

Setting Gcode Print Pauses for Filament Changes in Simplify3D

Sometimes to add a little jazz to your 3d prints, you may want to change filaments halfway through. Sometimes it is possible to watch your 3d printer manually to do a pause and replace. However, if you are running a lot of similar pieces which require consistency in swapping filaments …

Supports Placement for Resin 3D Printing

Getting Started for Resin 3D Printing Support Placement One of the first things which will hit you when getting started with slicing for 3d resin printing is how different it is, especially if you had done a lot of slicing for FDM printing before. As opposed to a right-side up …

Getting Started with Resin 3D Printing – Tabletop Minis

3D Printed Resin Mini

After having been using FDM 3D Printers for over 4 years, it was time to embark upon resin 3d printing. Fortunately, there is a new range of more budget friendly DUP (Direct UV Printing) Resin 3d Printers such as the Wanhao Duplicator 7 so it’s really a good time as …

Singapore Maker Faire 2017 in Photos!

And once again, annual Singapore Maker Faire rolls around and it’s time for us and our friends to put up our little showcases of what we have been working on! As usual, it’s our plethora of 3d printed models and projects at our main booth. On the flanks we have …

2

Setting up Cura for ATOM 2.5EX Dual Extrusion

Here’s a translated version of the official ATOM guide for setting up your ATOM 2.5EX Dual Extrusion in Cura. Great thanks to the ATOM team for allowing us to translate it to share with more folks. Here we go: Getting Cura Installed with Atom 2.5 EX Machine Profile First off, …

4

Setting up Simplify3D for ATOM 2.5EX Dual Extrusion

First off, main credit for this guide goes out to 黃至宇 from ATOM 3D Printer Group for putting together this guide (originally in Chinese) for Dual Extrusion in Simplify3d (S3D) for the ATOM 2.5EX. Here is the English version of the guide so more can benefit from the information: Foreword …