Monocure 3D Rapid Resin – Flex100 Clear (1L)
In stock (can be backordered)
We designed our Rapid FLEX100™ Resin for low powered LED/LCD DLP type 3D printers. The FLEX100™ has an extremely high level of flexibility so you can 3D print compressible and bendable models. The thicker the part, the less flexible it will become. The clear appearance allows you to see internal structures when 3D printed.
All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.
The Viscosity of our FLEX100™ is 30-50 cps @ 25°C (Brookfield RVT).
All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>
Please store Monocure 3D resin in a dark, cool place out of direct sunlight.
FLEX100™ can be used on its own or by mixing with our Rapid colour range to produce varying degrees of flexibility and firmness. By adding a small amount of FLEX100™ to the Rapid resin would create a less brittle and more durable part. By adding larger amounts, the more flexible it will become. Please ensure that you weigh the products so results can be replicated. Our CMYK pigment set can be used to obtain the required colours you desire. It’s always important to follow the safety and technical information before use.