Volskaya Industries Turret from Heroes of the Storm

$4.00

Description

 

 

This model is based on the Volskaya Industries Turret from Blizzard’s Heroes of the Storm game. It has been scaled to be slightly taller than 10 cm, thought its final size can definitely be adjusted in your slicer before 3d printing.

The turret assembles easily with a central peg which connects the head and base of the turret, allowing for a swivel motion. Depending on the tolerances of your 3d printer, you may like to scale this central peg up or down slightly for a tighter or looser fit as you like.

The pieces will have been modeled to to work well when 3d printed at 0.2 or lesser layer height, 15-20% infill and with 2-3 shells. Supports will be needed but should not be too difficult to remove.

This is a fairly simple model to print. Depending on your 3d printer and print setting, you can expect to around 5-6 hours for all the parts.

===

All rights for the original design belong to and are derived from the awesome Heroes of the Storm game by Blizzard.

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios).

Support us on Patreon – https://www.patreon.com/FunbieStudios where this and other models are available.